Italiano
English
DYNFLEX
High quality TPU available with different degrees of hardness.
For strong and flexible prints with high mechanical properties. Good printability, excellent layer adhesion.
It doesn't require closed chamber, odorless while printing.
TPU is hygroscopic, it is recommended to store in a dry place away from light and heat sources.
Before printing, it is preferable to remove any traces of moisture absorbed by heating the reel at 50/60° C for one or two hours.
Alternatively, a drybox can be used for the entire print time. Before actual use, let the DryBox heat up the coil for at least one hour.
For strong and flexible prints with high mechanical properties. Good printability, excellent layer adhesion.
It doesn't require closed chamber, odorless while printing.
TPU is hygroscopic, it is recommended to store in a dry place away from light and heat sources.
Before printing, it is preferable to remove any traces of moisture absorbed by heating the reel at 50/60° C for one or two hours.
Alternatively, a drybox can be used for the entire print time. Before actual use, let the DryBox heat up the coil for at least one hour.
